Mar

18

Aqua Mix Enrich and Seal

March 18, 2007 |

AQUA MIX ENRICH’N'SEALTM is a premium, no-sheen, enhanced-look penetrating sealer formulated to darken, enrich and highlight the character and beauty of unsealed natural stone. It rejuvenates the color and improves the appearance of worn and weathered stone. May also be used as a pre-grouting sealer. Allows moisture-vapor transmission. It also effectively seals and darkens the color of grout joints.

Aqua Mix Enrich and Seal Uses
Use on unsealed natural stone such as marble, granite, slate, limestone, travertine, quartzite and sandstone. Effective for interior and exterior applications.

Coverage
Approximately 500 to 1,500 sq. ft (46 m² to 139 m²) per coat per gallon (3.785), depending on type of stone, porosity and texture of surface, temperature, humidity, and method of application.

Method of Application
READ ENTIRE LABEL BEFORE USING

1.) Read entire label before using.

2.) For new installations, sealer can be applied as soon as 48 hours after grouting.

3.) Surface must be clean, dry and free of existing sealers or coatings.

4.) Apply using a sponge, brush, paint pad, cotton towel or sprayer. NOTE: Be sure any sealer that does not penetrate surface is polished dry off surface within 5 minutes of application using absorbent paper or cotton towels.

5.) If 2 or more coats are applied, allow a minimum of 30 minutes dryng time between coats.

6.) Ready for surface traffic in 12 hours after final coat. Keep dry for 12 hours. Achieves full cure in 48 hours. Some highly porous surfaces may require an additional coat after full cure.

7.) Clean applicator tools with mineral spirits after each use.

buy Aqua Mix Enrich and Seal here.

Tags:

Popularity: 22%

Share This


Comments

Name (required)

Email (required)

Website

Speak your mind

Comments are closed.

Close
E-mail It