Mar
18
Get rid of Grout Haze - Aqua Mix Grout Haze Cleanup
March 18, 2007 |
AQUA MIX GROUT HAZE CLEAN-UP is a safe and effective concentrated cleaner that is added to the final bucket of grout cleanup water for removal of cementitious grout haze and latex additive film from tile during the grout cleanup process. It may also be used full-strength to remove light grout residue within the first 10 days after grouting.
Uses
Use on unpolished natural stone (such as granite, limestone, marble, slate, and travertine), polished granite and slate, ceramic, porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other stone and tile surfaces.
Coverage
Approximately 300 to 600 sq. ft. (30 m² to 55 m²) per pint (473 ml) depending on dilution.
When diluted, one gallon (3.785L) yields up to 128 gallons (484L) of cleaning solution which will clean approximately 10,000 to 20,000 ft2 (930 to 1,860 m2)
DURING GROUT CLEANUP:
1.) Read entire label before using.
2.) Perform grout cleanup per grout manufacturer’s instructions.
3.) During final grout cleanup rinse, mix a minimum of 3 ounces (90 ml) of Grout Haze Clean-Up per gallon (3.785 L) of water.
4.) Wet a grout sponge or terry cloth towel with the cleaning solution, wring out excess liquid.
5.) Wipe diagonally across the tile.
6.) Repeat steps 4 and 5 every 10 to 15 sq. ft. (.9 m2 to 1.3 m²) or as necessary.
7.) Remove residual cleaning solution using a clean grout sponge or terry cloth towel dampened with clean water only.
AFTER GROUT CLEANUP - WITHIN 10 DAYS OF GROUTING:
1.) Use full-strength if grout haze was not completely removed during grout cleanup.
2.) Apply directly to surface and agitate with white nylon scrub pad or brush.
3.) Allow product to dwell for 5 to 10 minutes for stubborn areas or heavier grout residue.
4.) Rinse with clean water to remove residual cleaning solution.
Buy Aqua Mix Grout Haze Cleanup here
Popularity: 57%
